BaddJet Shop Home

Part details

RIVA Racing · Handling

RIVA Racing ride plate, Yamaha SuperJet

Aftermarket ride plate for the 1996 to 2007 round-nose SuperJet. No dimensions or handling claims are given until RIVA supplies them.

Price on request Stock not tracked

Ask about this part

Not yet listed for online checkout. Ask for the price and lead time, no obligation.

Small parts, flat rate quoted when you enquire, ships worldwide from the US

Once orders open: returns within 30 days, no salt damage.

How ordering and returns work · Who is behind this shop

Class legality
IHRA Ski GP3: legal with conditions · IHRA Ski Lites: legal with conditions · IJSBA Ski Lites: legal with conditions

Specification

Part number
RIVA-SJ-RP
Condition
New aftermarket
Supply
Still in production

Listed: 1996 to 2007. Recorded, not listed: 1994 to 1995, 2008 to 2009.

Filled: the years this part is listed to fit, 1996 to 2007, out of every Yamaha SuperJet 701 year the archive records. For a hollow year, ask before you buy.

How we know: the part's fitment record, and the archive's SuperJet 701 model rows, 1994 to 2009; square nose and round nose are owners’ names, not Yamaha’s.

A jet pump in side section, from the intake grate to the jet the craft moves forward engine drive shaft hull bottom intake grate water in ride plate pump housing pump stator wear ring steering nozzle pivot impeller tip gap nozzle narrows jet thrown back this part

Drawn heavier and labelled "this part": the ride plate. This is where this kind of part sits on a jet pump, drawn fresh from patents rather than from any one maker's pump.

How we know: US patents 8,905,800 (lines 64 to 70 of the held copy), 5,833,501 (lines 67, 91, 93 and 94), 5,520,558 (line 48), 6,705,908 (lines 36, 39 and 89), 6,857,919 (line 194) and 6,523,489 (lines 185 to 187).

Not to scale.

Fitment

Engine families: Yamaha 701. This is information about the engine, not a fitment claim. An engine match does not mean the part goes into your ski.

Class legality

Legal, with conditions Ski GP3 (archive) · IHRA · 2026 rulebook · J.18.1

The ride plate rule is universal across IHRA classes and names the Ski class directly, so it reaches GP3 unchanged: an aftermarket or modified plate is permitted, any extension may not exceed the original plate's width, and the plate may not extend more than 3.94 inches (100mm). Watch the interaction with M.6.2.1.1, which separately allows a SuperJet hull extension of up to 100mm beyond the original planing surface, because the two limits are measured from different places and a rider running both should check them together.

Checked against the rulebook on 2026-09-07, version V.20260603 · Read the rulebook, Ski GP3

Legal, with conditions Ski Lites (archive) · IHRA · 2026 rulebook · J.18.1

J.18.1 permits an aftermarket or modified ride plate. Extensions added to it must not exceed the width of the original plate, and for the Ski class an aftermarket ride plate must not extend more than 3.94 inches (100mm). All components must be free of hazardous edges, a condition IJSBA does not state in those words. Check the plate against a tape and against the original before you run it.

Checked against the rulebook on 2026-09-07, version V.20260603 · Read the rulebook, Ski Lites

Legal, with conditions Ski Lites (archive) · IJSBA · 2024 rulebook · SKL.2.5

IJSBA calls this component the pump cover plate, and SKL.2.5 permits a modified or aftermarket one. Three conditions apply and all are dimensional: a rear extension must not exceed the width of the original equipment plate, the plate must not extend more than 100.00mm (3.94 in.) beyond the end of the original plate, and fins, rudders, skegs or other appendages that may create a hazard are not allowed. The sides of any extension must connect to the radiused portion of the plate. Do not confuse this with a fixed trim tab or a hull extension, which are different parts governed by SKL.2.7 and may not be used in Ski Lites at all, and note that SKL.2.6 separately restricts trim plates to replicas matching stock handling. Measure the plate before racing it.

Checked against the rulebook on 2026-09-07 · Read the rulebook, Ski Lites

Ask about this part

Tell us your ski. We answer cost, fit and class legality, or say we do not know.

We use your name and email only to reply. What we hold, and how to delete it.

Asking about: RIVA Racing ride plate, Yamaha SuperJet (RIVA-SJ-RP). We reply by email.

RIVA-SJ-RP · RIVA Racing

Start menu
BaddJet Parts